A 3D printer is definitely a complex machine, and like all other machines, it is important to take care of it the proper way, if you want to avoid any problems in the long run. This is where proper maintenance comes in. Here, we shall look at three tips that are going to help you with maintenance of your 3D printer.
Lubrication of the engine:
Just like the engine of an automobile, the moving metal parts of a 3D printer can cause stoppages. Thus, it is important to keep it lubricated. However, remember that you should not use motor oil. You can use sewing machine oil instead of it. Just using one drop or two is likely going to do the trick. Various types of lubricants can work, but you just need to make sure that it is safe to use them with plastic.
Check regularly if the bed is level:
Before the beginning of affordable bed leveling sensors, it was quite common to see 3D printers using wingnuts and springs to hold the printer’s bed to its carriage. Although this can often mean that as the printer moves and vibrates, the wingnuts and thumbscrews might shake themselves loose. It is more common to see a bed rigidly mounted to the carriage, but you will need to check regularly if it is level.
Clean the extruder gears:
Cleaning the extruder gears is quite important, but people can generally ignore this step. During printing, this filament can get stripped and some small chips of filament might get stuck on your extruder, especially on the extruder gears that grip the filament. This can lead to inconsistent extrusion and filament slippage, and therefore it is important to make sure that you check the extruder from time to time.
Are you searching for the best 3D inspection solutions? If yes, you should not delay consider getting in touch with ASC International. Whether you are looking for the best automated optical inspection or the best 2d automated optical inspection, or whether you are looking for inline 3D SPI (Solder Paste Inspection), you will find the best services.
